Hardware Settings - D-Link DBT-122 Manual

Bluetooth Configuration

Hardware Settings

The Hardware tab of the Bluetooth Configuration Panel provides basic
information about the Bluetooth hardware installed on this computer and
access to the Advanced Settings dialog box, if required:
•
Devices:
•
•
•
Device Properties:
•
•
•
•
•
•
•
•
•
The Advanced button: displays the Advanced Settings dialog box,
which allows you to select the country code and transmission power
settings. This option is not available on all systems.
Name: the name of the device, e.g., WIDCOMM Bluetooth
Device
Type: the type of device, e.g., USB.
Device status: indicates that the device is operating properly or
that there is a problem/conflict.
Manufacturer: the name of the company that manufactured the
device selected in the Devices section of this dialog box.
Firmware Revision: the manufacturer's firmware version
number.
Device Address: the Bluetooth Device Address (BDA or BD_
Addr) assigned to this device when it was manufactured.
HCI Version: the version number of the Bluetooth Specification
that the Host Controller Interface complies with.
HCI Revision: the revision number of the Bluetooth
Specification that the Host Controller Interface complies with.
LMP Version: the version number of the Bluetooth Specification
that the Link Manager Protocol complies with.
LMP Sub Version: the sub-version number of the Bluetooth
Specification that the Link Manager Protocol complies with.
(cont'd)
51