D-Link AirPremier DAP-3690 User Manual page 18

Section 3 - Configuration
Allows selection of the channel width you would like to operate in. 20 MHz and Auto 20/40 MHz allow both 802.11n and non-
Channel Width:
802.11n wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4G and Mixed 802.11 a/n in 5G.
802.11n wireless devices are allowed to transmit data using 40 MHz when the channel width is Auto 20/40 MHz.
Remote AP MAC Enter the MAC addresses of the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Address:
Site Survey:
Click the Scan button to search for available wireless networks, then click on the available network that you want to connect with.
Authentication:
Use the drop-down menu to choose Open System, Shared Key, or WPA-Personal.
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled, this
option is not available.
Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.
For more information about the different types of Authentication offered on the DAP-3690 and the respective settings of each,
please go to the first page of the "Authentication" explanations, which begins on page 23.
D-Link DAP-3690 User Manual 18