D-Link AirPremier DAP-3690 User Manual page 16

Airpremier n concurrent dual band outdoor poe access point

Hide thumbs Also See for AirPremier DAP-3690:

Table of Contents

Section 3 - Configuration

Channel Width:

Allows selection of the channel width you would like to operate in. 20 MHz and Auto 20/40 MHz allow both 802.11n and non-

802.11n wireless devices on your network when the wireless mode is Mixed 802.11 b/g/n in 2.4G and Mixed 802.11 a/n in 5G.

When the channel width is set to Auto 20/40 MHz, then 802.11n wireless devices are allowed to transmit data using 40 MHz.

Authentication:

Select Open System to communicate the key across the network.

Select Shared Key to limit communication to only those devices that share the same WEP settings. If multi-SSID is enabled,

this option is not available.

Select WPA-Personal to secure your network using a password and dynamic key changes. No RADIUS server is required.

Select WPA-Enterprise to secure your network with the inclusion of a RADIUS server.

Select 802.1X if your network is using port-based Network Access Control.

For more information about the different types of Authentication offered on the DAP-3690 and the respective settings of each,

please go to the first page of the "Authentication" explanations, which begins on page 23.

D-Link DAP-3690 User Manual

Table of Contents