Multi-Ssid - D-Link DAP-2553 - Wireless N Dual Band Gigabit Access Point User Manual

Section 3 - Configuration
The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary
SSID. The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enable
Check to enable support for multiple SSIDs.

Multi-SSID:

Band:
This read-only value is the current band
setting.
Index:
You can select up to three multi-SSIDs. With
the Primary SSID, you have a total of four
multi-SSIDs.
SSID:
Service Set Identifier (SSID) is the name
designated for a specific wireless local area
network (WLAN). The SSID's factory default
dlink.
setting is
changed to connect to an existing wireless
network or to establish a new wireless
network.
SSID Visibility: Enable or Disable SSID visibility. Enabling
this feature broadcasts the SSID across the
network, thus making it visible to all network
users.
Security:
The Multi-SSID security can be Open System,
WPA-Personal, or WPA-Enterprise. For
a detailed description of the Open System
parameters, please go to page 23. For a
detailed description of the WPA-Personal
parameters, please go to page 24. For a
detailed description of the WPA-Enterprise
parameters, please go to page 25.
D-Link DAP-553 User Manual
Multi-SSID
The SSID can be easily changed to connect to an existing wireless
The SSID can be easily
3