Lan - D-Link DAP-2553 - Wireless N Dual Band Gigabit Access Point User Manual

Section 3 - Configuration
LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN
interface for the DAP-2553. These settings may be referred to as private settings. You may change the LAN IP address
if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.
Get IP From: Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in your
network, or if you wish to assign a static IP address
to the DAP-2553. When Dynamic IP (DHCP) is
selected, the other fields here will be grayed out.
Please allow about two minutes for the DHCP client
to be functional once this selection is made.
IP Address:
The default IP address is 192.168.0.50. Assign a
static IP address that is within the IP address range
of your network.
Subnet
Enter the subnet mask. All devices in the network
Mask:
must share the same subnet mask.
Default
Enter the IP address of the gateway in your network.
Gateway:
If there is a gateway in your network, please enter
an IP address within the range of your network.
D-Link DAP-553 User Manual

LAN