Start-Up And Temperature Control; Starting The Unit; Adjusting The Temperature - Electrolux E24WC75HPS - Icon - Professional Series 48 Bottle Wine Cooler Use And Care Manual

Start-Up and Temperature Control

Starting the Unit

Your wine cooler is shipped in the ON position; however, you may turn it ON or OFF by pressing and
holding the ON/OFF for three (3) seconds and then releasing the key.

Adjusting the Temperature

To accurately check the temperature, insert a reliable thermometer
into a plastic (non-breakable) bottle, partially filled with water.
Tighten the bottle cap securely.
Place the bottle in the desired area for 24 hours. Refrain from
opening the unit during the testing period. After 24 hours, check the
temperature of the water.
Press and release the (+) or (–) indicator to adjust the temperature
to the desired setting. The temperature display will begin to blink
with the first touch and release. Adjust the temperature by touching
and releasing the key. After three (3) seconds of inactivity, the
display will beep to accept the new temperature.
Factors that affect the internal temperatures of the cabinet include:
1 Temperature setting.
2 Room temperature where installed.
3 Number of times the door is opened and closed.
4 Amount of time the internal light is illuminated. This affects primarily wines/beverages on the top
racks/shelves.
5 Installation in direct sunlight or near a heat source.
13