Table of Contents
Advertisement
8
Start-Up and Temperature Control
Starting the Unit
Your wine keeper is shipped in the ON position; however, you may turn it ON or OFF by pressing the ON/OFF
for three (3) seconds.
Adjusting the Temperature
To accurately check the temperature, insert a reliable thermometer into a
plastic (non-breakable) bottle, partially filled with water. Tighten the bottle
cap securely.
Place the bottle in the desired area for 24 hours. Refrain from opening the
unit during the testing period. After 24 hours, check the temperature of the
water.
Press the (+) or (–) indicator to adjust the temperature to the desired
setting. The temperature display will begin to blink with the first touch.
Adjust the temperature by touching the key. After three (3) seconds of
inactivity, the display will beep to accept the new temperature. The internal
temperature can be controlled between 45°F to 65°F (7°C to 18°C).
Factors that affect the internal temperatures of the cabinet
• Temperature setting
• Room temperature where installed
• Number of times the door is opened and closed
• Amount of time the internal light is illuminated
• Installation in direct sunlight or near a heat source
Advertisement
Table of Contents
