JVC JY-VS200U - Professional Dv 1-ccd Camcorder Features Manual page 23

58
EN
Power Switch
Connector
cover** To
S-VIDEO
S-Video
cable
(provided)
Yellow to
To
VIDEO IN
S-VIDEO
or OUT*
IN or OUT
VCR
TV
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
To Use This Camcorder As A Recorder . . .
1. Set the Power Switch to "
2. Set "S/AV INPUT" to "ON" and set "REC MODE" to "SP" or "LP" (
3. Connect the cables as shown in the illustration and load a cassette to record on.
4. Press the Recording Start/Stop button to engage the Record-Pause mode. "
5. Press the Recording Start/Stop button to start recording.
6. Press the Recording Start/Stop button again to engage the Record-Pause mode.
NOTES:
After dubbing, set "S/AV INPUT" back to "OFF".
Analog signals can be converted to digital signals with this procedure.
It is also possible to dub from another camcorder.
JY-VS200U EN 36-65
Dubbing To Or From A VCR
[To use this camcorder as a player]
1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 54 and 55.
2
Set the camcorder's Power Switch to "
pressing down the Lock Button located on the switch,
To AV
turn on the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder 's Play mode to find a spot just
before the edit-in point. Once it is reached, press
Audio/
Video cable
4/6 on the camcorder.
(provided)
5
Press 4/6 on the camcorder and engage the VCR' s
Record mode.
White to
6
Engage the VCR's Record-Pause mode and press
AUDIO L IN
4/6 on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
Red to
stop the VCR and camcorder when finished.
AUDIO R
IN or OUT
NOTES:
You can use Playback Zoom (
Special Effects (
Before you start dubbing, make sure that the indications do
not appear on the connected TV. If they do, they are being
recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
• Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
• Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen (
• Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the Menu
Screen (
control.
" while pressing down the Lock Button located on the switch.
rotates.
58
DUBBING
" while
pg. 63) or Playback
pg. 64) in step 5.
pg. 41).
pg. 41).
pg. 41). Or, press DISPLAY on the remote
pg. 41).
" appears on the screen.
AV. IN
stops rotating.
01.3.12, 7:06 PM