Pioneer AVIC Z3 - Navigation System With DVD player Operation Manual page 177

Appendix
The audio skips.
"Rear display" picture disap-
pears.
Nothing is displayed and the
touch panel keys cannot be
used.
Touch panel key is not respond
or a different key is responding.
CD recording is not possible.
CD recording doesn't stop
though the record progress indi-
cator shows 100 %.
"NO SIGNAL" is displayed at the
right corner on the map.
"UPDATING" is displayed at the
right corner on the map.
The navigation system is not firmly
secured.
Failure hard disk drive.
The setting for [REAR SCREEN] is in-
correct.
There was a problem with the "Rear
display" or a faulty wiring connec-
tion, for example.
When the shift lever is in [R], the
rear view camera images are dis-
played. (When [MIRROR] is selected
in [REAR SCREEN] menu.)
[DVD-V Setup] is carried out.
The setting for the rear view camera
is incorrect.
The shift lever was placed in [R]
when the rear view camera was not
connected.
The back light of the LCD panel is
turned off.
Touch panel keys deviate from the
actual positions that respond to
your touch for some reason.
A disc that cannot be recorded,
such as MP3 disc or DVD-video, is
inserted.
Music Library recording will be can-
celed after playback of the current
track is finished. (The recording
mode stops at the interval of the
tracks.)
While waiting for a response from
the XM tuner.
You are in an area that cannot re-
ceive XM tuner reception.
Your current location provides very
poor reception.
Service subscription is either XM
audio only or XM NavTraffic stand
alone.
Secure the navigation system firmly.
Consult your Pioneer dealer.
Please read the following page and set the
rear screen setting correctly. (Page 153)
Check the "Rear display" and its connection.
Select [DVD] or [AV] in [REAR SCREEN]
menu. When you move the shift lever to a po-
sition other than [R], the screen will be re-
turned to the previous display.
You can not display the video image to "Rear
display" during [DVD-V Setup] menu.
Connect a rear view camera correctly.
Press AV button to return to the source dis-
play and then select the correct polarity set-
ting for [Camera Input]. (Page 149)
Press V button to turn on the back light.
Perform the touch panel calibration. (Page
190)
A disc other than a normal music CD cannot
be recorded.
Wait until the current track has ended or
change the source manually.
Wait for a while and try the operation again.
Move into an area that can receive XM tuner
reception.
Change your location.
Since the GEX-P10XMT is capable of receiving
both XM audio and XM NavTraffic service, if
you are subscribed to only one or the other,
the system checks to see if you have added
another service to your account since you
last powered on the navigation system. When
you subscribe to both services, this message
will stop appearing when you turn the ignition
ON (ACC ON).
Appendix
177
En