Date And Time Setting - Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Instruction Manual

DATE AND TIME SETTING

The camera will record the date and time an image is captured so that you
can display them during playback. Therefore, before capturing images, make
sure the correct date and time are set.
Example: To set the clock to 7:30 p.m. on December 24, 2008
1
Press the ON/OFF button to turn
the camera on, and press the
MENU button.
h The Recording Menu appears
(page 67).
2
Press the [o] button to select the
3 tab, and press the [m] button.
h The Option Menu appears
(page 103).
3
Press the [n] or [o] button to
select "CLOCK SET", and press
the SET button or the [m] button.
h The Clock Set Screen appears.
h The current date and time
settings are shown.
h Follow the procedures below to
enable or disable the date display
during playback, to set the display
format for the date, and to set the
date and time.
h To return to the Option Menu,
press the MENU button.
25
English
RECORDING MENU
TOUCH SENSOR
RESOLUTION
COMPRESSION
FOCUS MODE
EXP MEASURE
ISO
OK
3 tab
OPTION MENU
1/2
CLOCK SET
SOUND
POST VIEW
BRIGHTNESS
LANGUAGE
TV SYSTEM
OK
CLOCK SET
2008/03/01
DATE
12:00
TIME
DISP Y / M / D
OK
1/2
10
M
EXIT
1sec
0
NTSC
EXIT