Viewing Still Images - Sanyo VPC E1 - Xacti Camcorder - 6.0 MP Instruction Manual

CAPTURING AND PLAYING BACK STILL IMAGES

Viewing still images

The steps for viewing both single shots and sequential shots are the same.
5
Press the playback button
[=].
h If the playback button [=]
was pressed to turn the
camera on, however, press the
playback button [=] for at
least 1 second.
h The image most recently
captured appears on the
monitor.
6
View other images.
h Press the [l] or [m] button to
display the previous or next
image.
To display the previous image:
Press [l].
To display the next image:
Press [m].
h To return to Shooting Screen,
press the playback button
[=].
<If the camera was turned on by pressing the playback button [=]>
h When the playback button [=] or ON/OFF button is pressed, the
camera turns off.
When you are finished viewing images...
i Press the ON/OFF button to turn the camera off.
HINT
For still images with voice memo (page 55)...
i When the shutter button is pressed, the voice memo is played back.
39
English
Playback button [=]
2008.12.24 2008.12.24 2008.12.24
100-0001 100-0001 100-0001