Removing Bezel Blanks - Compaq 239158-999 - Mini Tower - Power Supply 250 Watt Hardware Reference Manual

Hardware Upgrades

Removing Bezel Blanks

2-6
1. If you have locked the Smart Cover Lock, use Computer Setup
to unlock the lock.
2. Shut down the operating system properly, then turn off the
computer and any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
3. Remove the computer access panel. Remove the front bezel.
4. Gently pull the subpanel, with the bezel blanks secured in it,
away from the front bezel, then remove the desired bezel blank.
CAUTION: Hold the subpanel straight when you pull it away from the
front bezel. Pulling the subpanel away at an angle could damage the
pins that align it within the front bezel.
Removing Bezel Blanks from the Subpanel (Desktop Shown)
When replacing the subpanel, ensure that the aligning pins and any
remaining bezel blanks are in their proper orientation.
Hardware Reference Guide