Symbol Meaning; Safety Alert Symbol - Craftsman 10872 - Mini Circular Saw Operator's Manual

The purpose of safety symbols is to attract your attention to possible dangers.
The safely symbols, and the explanations with them, deserve your careful attention
and understanding, The symbol warnings DO NOT by themselves eliminate any
danger, The instructions and warnings they give are no substitutes for proper accident
prevention measures,
A WARNING:
BE SURE to read and understand all safety instructions in this
manual, Including al! safety alert symbols such as "DANGER", "WARNING" and
"CAUTION", BEFORE using this saw. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious personal injury.
SYMBOL MEANING
l / e_ sAFETY ALERT sYMBOL: IndIcates DANGER'WARNING' O R 1
CAUTION.Maybe used In conjunctionwith other symbolsor plctographe.
[-_ DANGER: Failure to obey this safety warning WILL result in |
1
death or serious Injury to yourself or to others. Always follow
l
the safety precautions to reduce the risk of fire, electric shock
and personal Injury.
[ _WARNING ]
Failure to obey this safety warning CAN result In death or I
]
serious Injury to yourself or to others. Always follow the safety
precautions to reduce the risk of firs, electric shock and
persons! Injury.
|
,'_ CAUTION I
Failure to obey this safety warning MAY result In personal I
injury to yourself or others or property damage, Always follow
l
the safety precautions to reduce the risk of fire, electric shock
t
and personal Injury,
DAMAGE PREVENTION AND INFORMATION MESSAGES
These Inform user of important Information and/or Instructions that could lead to
equipment or other property damage _fnot followedo Each message ts preceded by the word
"NOTE:" as in the example below:
NOTE: Equipment and/or property damage may result If these Instructions are
not followed.
J
WEAR YOUR
_WARNING: The operation of any tool with s ¢lmular
btade can result in foreign objects being thrown into your
eyes, which can result In severe eye damage. Before
beginning power tool operation, ALWAYS wear safety
goggles or safety glasses with aide shield and s full-face
shield when needed. We recommend a Wide V|slon Safety
Meek for use over eyeglasses or standard safety glasses
with side shield, available at Sears Stores or other
Craftsman Outlets.