Texas Instruments TINSPIRE Manual Book page 219

Warning! Do not touch or move the TI-Navigator™ Access Point when
the antennas are transmitting or receiving.
Warning! The TI-Navigator™ Access Point, TI-Nspire™ Navigator™
Cradle, and TI-Nspire™ CX Wireless Network Adapter are intended for
indoor use only. Do not install the device nor operate it outdoors.
Warning! Intentional radiators, such as the TI-Navigator™ Access Point,
TI-Nspire™ Navigator™ Cradle, and TI-Nspire™ CX Wireless Network
Adapter are not intended to be operated with any antenna(s) other than
those furnished by Texas Instruments. An intentional radiator may only
be operated with the antenna(s) with which it is authorized.
Warning! The TI-Navigator™ Access Point radio(s) are disabled by
default and can be enabled only by the system administrator using the
Management software application.
Warning! The radio frequency band, operating channels, and transmit
power depend on the country of operation specified by the system
administrator during setup and configuration using the Management
software.
Warning! Only qualified personnel must perform installation. Read and
follow all warning notices and instructions marked on the product or
included in the documentation.
Regulatory Information 213