Texas Instruments TINSPIRE Software Installation Manual page 44

 LOGDIR
#Configuration item that specifies the log file directory created for logging
installation/activation process
#Accepted values: complete file path name.
LOGDIR=Default
--------------------------------------------------
License types: Volume and Concurrent
Comment: The default location for log files is determined by the system
based on the user profile. The success or failure of the activation
process is recorded in the log. The default path is dependent on the
operating system used. To change the location enter the complete path
and name.
Examples defaults:
Windows® XP: C:\Documents and Settings\username\Application Data\
Texas Instruments\softwarename\logs
Windows Vista®:
C:\Users\username\AppdData\Roaming\softwarename\logs
Mac® OS X: /Users/username/Library/Preferences/Texas
Instruments/softwarename/logs
 ACTIVATE
#Configuration item that enables immediate 3 attempt random silent
activation. If value is set to 'no' silent activation will be done until first
launch.
#Accepted values: YES/NO
ACTIVATE=YES
-------------------------------------------------
License types: Volume
Comment: You can specify activation to occur at the time of
installation or you can specify for activation not to start. If ACTIVATE=
NO the license is not activated until the teacher or student runs the
program. This may be useful if you are deploying before the start of
the semester and have a subscription license term. In this method you
are not using time off the subscription until needed.
40 Installing and Activating TI Software