Chapter 2 Basic Controls And Connections; Front Panel - Vizio VM190XVT - XVT-Series 720p LED LCD HDTV User Manual

VIZIO VM190XVT/VM230XVT User Manual

Chapter 2 Basic Controls and Connections

Front Panel

POWER 'VIZIO' LIGHT—The VIZIO
logo lights white when powered on.
Your HDTV TV features touch-sensitive
buttons that light when active. The
proximity sensor detects you, and as
your hand gets closer to the surface, the
intensity of the LEDs increase.
Remote Control Sensor—Point the
remote control directly at this window on
the lower left corner of your HDTV for
the best response to the remote signal.
1. POWER ( )—Turn your HDTV on
by pressing the button once. Press the
button again to turn your HDTV off.
2. MENU—Press to launch the on-screen
menu. If a sub-menu is active, this button
will proceed to the next level.
▲ ▼
3. CH / —Press to change the
channels up or down. While the menu is
active, these buttons function as up and
down controls.
▲ ▼
4. VOL / —Press to increase or
decrease the speaker volume. While the
menu is active, these buttons function as
left and right controls.
5. INPUT (SELECT)—Press to cycle
through the various devices connected to your TV (called Inputs). The inputs cycle in the following
sequence: TV, AV (Composite), COMP (Component), HDMI-1, HDMI-2, and RGB (VGA). Once you have
stepped through the entire sequence, you will return to the beginning. If a sub-menu is active, pressing
this button will return to the previous menu level. Additionally, when the menu is active, this button
confirms the menu function to be adjusted.
10
www.VIZIO.com