Pause-Live-Tv (Plt); Viewing Digital Tv Program Information; Info Button - Vizio VM190XVT - XVT-Series 720p LED LCD HDTV User Manual

VIZIO VM190XVT/VM230XVT User Manual

Pause-Live-TV (PLT)

This feature allows you to pause the digital program being viewed (either from your cable service without
Set-Top Box or from an antenna) and resume viewing from the point at which the program was paused.
Connect a USB 2.0 device with a minimum of 1 GB of memory and use the following buttons on the
remote control to operate this feature:

II pauses the live program and starts recording for up to 29 minutes. A count-down timer will be
displayed.

► resumes the playback.

and skips forward and rewinds in 15 second increments.

exits back to live TV. You can also press TV, AV, COMP, or HDMI to exit this feature directly to
the different inputs.
Note: The connected USB device must:

Have a minimum 1 GB of memory.

Be formatted as FAT32.

Have a write speed higher than 10Mb/sec (USB1.1 or higher).

Be blank (contain no other files).

Viewing Digital TV Program Information

INFO Button

When the channel is changed or when you press the INFO button, an information header is shown over
the picture for a few seconds. Each press of the INFO button will display more information about the
program:
16
www.VIZIO.com