Windshield Wiper Blade Replacement - Chevrolet VENTURE 1999 Owner's Manual

A. Taillamp Bulb
-
B. Back Up Lamp Bulb
6. Snap the bulb holder back into place, making sure all
retaining tabs are properly over the bulb holder tabs.
7. Reinstall the taillamp assembly by inserting the
outboard locating/retaining pins until the lamp is
seated. Secure with the inboard screws.
For any bulb changing procedure not listed in this
section, contact your dealer's service department.
6-38
C. Turn Signal Lamp Bulb
D. Stop/Taillamp Bulb

Windshield Wiper Blade Replacement

Windshield wiper blades should be inspected at least
twice a year for wear and cracking. See "Wiper Blade
Check" in Section 7 of this manual under Part B "Owner
Checks and Services" for more information.
Replacement blades come in different types and are
removed in different ways. For the proper type and
length, see "Normal Maintenance Replacement Parts" in
the Index.
Here's how to remove the Shepherd's Hook type:
1. Turn the wipers on to the lowest intermittent setting.
2. Turn off the ignition while the wipers are at the outer
positions of the wipe pattern. The blades are more
accessible for removal/replacement while in
this position.
3. Pull the windshield wiper arm away from the
windshield or backglass.
yellowblue