Advertisement
Comfort Controls and Audio Systems
Theft Deterrent Feature
The theft deterrent feature for the AMEM
stereo with cassette tape and compact disc
player can be used or ignored. If ignored,
the system plays normally. If it is used,
your system won't be usable if it's ever
stolen.
Setting Your Security Code
The instructions below tell you how to
enter a security code into the system. If
your vehicle loses battery power for any
reason, you must enter the security code
again before the system will turn on.
1. Write down any four-digit number and
keep it in a safe place.
2. Turn on the ignition switch to the
"ACC" or "ON' position.
3.
Turn the audio system off.
4. Press the "1" and "4" buttons together.
Hold them down until
"-
- -
-"
shows
on the display.
You
are now ready to enter your security
code. Don't wait more than 15 seconds
between steps.
5.
Press
"4
SEEK b" and/or
"4 TUNE b" and
"0000"
will appear
on the display.
first digit of your code appears.
Release the button.
6. Press "SEEKI" and hold it until the
7.
Press "SEEK b" and hold it until the
second digit of your code appears.
Release the button.
8.
Press "TUNE
4"
and hold it until the
third digit of your code appears.
Release the button.
9. Press "TUNE b" and hold it until the
fourth digit of your code appears.
Release the button.
checked that the code you entered is
the one you wrote down. "rEP' will
appear in the display, which means
you need to repeat steps
5
through 9.
11. Press "AM-FM" again and the
display will now show "SEC."
1
p.
Press "AM-FM' after you have
How to Shut Off the Theft-Deterrent
Feature
If your radio is secured ("SEC" shows on
the display) and you wish to disable it,
enter your security code as follows,
pausing no more than
15
seconds between
steps:
1. Press the "1" and "4" buttons together.
Hold them down until
"SEC"
shows
on the display. You are now ready to
enter your security code.
until the f i s t digit of your code
appears.
3.
Press the
"SEEK b"
button and hold it
until the second digit of your code
appears.
4. Press the "TUNE 4" button and hold
it until the third digit of your code
appears.
5.
Press the "TUNE b" button and hold
it until the fourth digit of your code
appears.
checked that the code you entered
matches the one you wrote down.
display.
2. Press the "SEEKI" button and hold it
6. Press "AM-F'"' after you have
L L
- - - -
"
should now appear
in
the
...
96
Advertisement
