Advertisement
Service and Appearance Care
Radiator Pressure
Cap
16-Valve Engine
To Add Coo1ant:If
you need to add more
coolant, add the proper mix
qt
the coolant
recovery tank.
Add coolant
mix
at the recovery tank, but
be careful not to spill it.
NOTICE:
Your radiator cap
is
a
13
psi
(90
kPa)
pressure-type cap and must be tightly
installed to prevent coolant loss and
possible engine damage
from
over-
heating.
Be
sure the amows on the
cap line up with the overflow tube
on the radiator filler neck.
When you replace
your
radiator pressure
zap, an AC@ cap is recommended.
Thermostat
Engine coolant temperature is controlled
by a thermostat in the engine coolant
system. The thermostat stops the flow of
coolant through the radiator until the
coolant reaches a preset temperature.
When you replace your thermostat,
an
Ace'
thermostat is recommended.
. .
.172
Advertisement
