Advertisement
Seats and Restraint Systems
4. Unlock the bottom part of the seat.
On the one-piece rear seat, pull ou
On the split rear sear, lift the
the release ring.
release lever on either seat.
5. Lift the bottom of
the seat up and pus1
it toward the front of the vehicle.
i. Find the support bar
on
the bottom
of
the seat. This bar keeps the rear seat
from unfolding.
'.
Pull the inner end of the support off of
the seat
bracket
and
swing
it
down.
'.
Push the support bar into the floor
bracket.
Be
sure the support bar is
secured.
'0 unfold the seat:
ieep your hands, safety
belts and
other
bjects away from where the seat will
:st.
Pull the support bar out of the floor
bracket and swing
it
up and toward the
bottom of the seat.
Push the support bar into the bracket
on the bottom of the seat.
Slowly pull the seat down to the floor.
The seat should latch into place. Pull
up on the bottom of the seat to be sure
it is
locked in position.
Pull the seatback up and push
it
back.
Push and pull the top of the seatback
to
be
sure
it
is locked in place.
. .
. I 4
Advertisement
