Destination & Waypoint - Chevrolet CORVETTE - NAVIGATION SYSTEM 2008 User Manual

Destination & Waypoint
6
Dest. & Way Pt. (Destination & Waypoint):
Waypoints are destinations that can be added to your
route before reaching the final destination. Waypoints
can be added before or after entering a final destination.
Waypoints that were entered prior to setting a final
destination, will delete if a final destination has not been
entered. Up to five points can be stored as waypoints.
To add a waypoint:
1. Touch the Dest. & Way Pt. screen button from the
STORED LOCATIONS screen.
2. Touch the Add screen button from the DEST. &
WAY POINT screen.
3. Using the desired method of entering a destination,
enter the way point. See Enter Destination on
page 2-4 for more information.
A map screen will appear with the way point marked.
o
4. Select the (Way point) symbol on the map screen
to save the way point.
2-30
5. Repeat Steps 2 - 6 to add up to five way points to
your route. After the first waypoint has been saved,
the ADD WAY POINT screen will appear and
the waypoint will be on the screen. The second
through the fifth waypoint will not appear on
the ADD WAY POINT screen until the ADD button,
next to the corresponding waypoint row, is pressed.
After the ADD button has been pressed, the
system will return to the STORED LOCATIONS
screen.
To change the order of the waypoints:
1. Touch the Dest. & Way Pt. screen button from the
STORED LOCATIONS screen.
2. Touch the List screen button from the DEST. &
WAY POINT screen.
3. From the CHANGE ORDER screen, select on the
addresses, in the order you would like them to fall
on the route. After selecting the address line, a
number, indicating the order, will appear next to the
corresponding row.
4. Select OK to save the changes. The system will
return to the STORED LOCATIONS screen.