Destination & Waypoint - Chevrolet CORVETTE COUPE - NAVIGATION SYSTEM 2010 Owner's Manual

50 Infotainment System
To change the name of the point to
be avoided:
1. Touch the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Touch the List screen button
from the AVOID AREA screen.
3. Select the point to be changed.
4. Touch the Name screen button.
5. Use the alpha keypad to add or
to change the name.
Select the Show Name On
screen button to have the name
of the point appear on the
map screen.
6. Touch the OK screen button to
save the changes.
To change the position of the point
to be avoided:
1. Touch the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Touch the List screen button
from the AVOID AREA screen.
3. Select the point to be changed.
4. Touch the Position screen
button.
5. Touch the map to move the
location.
6. If desired, reduce or enlarge the
area around the point you want
to avoid by using the Reduce
or Enlarge screen buttons.
7. Touch OK to store the area.
To delete a point to be avoided:
1. Touch the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Touch the Delete screen button
from the AVOID AREA screen.
3. Select the point to delete. Use
the scrolling arrows as needed.
4. The system displays the
map screen with the name of the
point and a pop-up confirmation
message. Touch Yes to have
the point deleted; touch No
to cancel the function.
To delete all of the points to be
avoided:
1. Touch the Avoid Area screen
button from the STORED
LOCATIONS screen.
2. Touch the Del.All screen button
from the AVOID AREA screen.
3. The system displays a pop-up
confirmation message. Touch
Yes to have all of the points
deleted; touch No to cancel the
function.
Destination & Waypoint
6
Dest. & Way Pt. (Destination &
Waypoint): Waypoints are
destinations that can be added to
your route before reaching the final
destination. Waypoints can be added
before or after entering a final
destination. Waypoints that were
entered prior to setting a final
destination, will delete if a final
destination has not been entered.
Up to five points can be stored as
waypoints.