Chevrolet CORVETTE - NAVIGATION SYSTEM 2008 User Manual page 12

Entering an Address
To set a destination by entering a street address, do the
following:
1. If the radio is already on with a map disc inserted,
skip to Step 5.
2. Press the power/volume knob to turn the system on.
3. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-49 for more
information.
4. A notice may appear. Touch the Agree screen
button to proceed.
5. Press the NAV hard key.
6. Press the MENU screen button.
<
7. Press the Enter Destination screen button.
Verify that the selected Region is correct.
2
8. Press the Address screen button.
9. Enter the street name using the alpha keypad on
the screen.
Do not enter directional information or street type,
and use the space symbol screen button (
between street or city names. For example, the
street name N. Royal Oak Rd. should be entered as
U
royal oak. Use the backspace (
button if an incorrect character has been entered.
1-8
10. Select the desired street name with the correct
11. If there is more than one city, the system will
12. Enter the house number using the numeric keypad
13. Select the
14. Select the Guide screen button.
15. Once you begin driving you will hear an audio
See "Address" under Enter Destination on page 2-4 for
more information.
U
)
V
) screen
designation (Dr., Ln., St., etc.) from the list.
display the list of cities that have a street with
that name. Select a city from the list or select the
Input Name screen button to input the city name.
on the screen and touch the OK screen button.
A map screen will appear with the destination
marked.
h
(destination) symbol screen button.
prompt to "Proceed to the highlighted route."
You are now in route guidance mode.