How Users Access A Voice-Messaging System - Cisco 7985G - IP Phone NTSC Video Administration Manual

How Users Access a Voice-Messaging System

How Users Access a Voice-Messaging System

Cisco Unified IP Video Phone 7985G Administration Guide
A-4
A user ID and default password that is needed to access the application.
•
These settings correspond to the values that you entered when you added the
user to Cisco Unified CallManager (see the
Unified CallManager" section on page
A brief description of what a web-based, graphical user interface (GUI)
•
application is and how to access it with a web browser.
An overview of the tasks that users can accomplish by using the window.
•
You can also refer users to Customizing Your Cisco Unified IP Phone on the Web,
which you can find at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Cisco Unified CallManager lets you integrate with many different
voice-messaging systems, including the Cisco Unity voice-messaging system.
Because you can integrate with a variety of systems, you must provide users with
information about how to use your specific system.
You should provide this information to each user:
How to access the voice-messaging system account.
•
Make sure that you used Cisco Unified CallManager to configure the
Messages button on the Cisco Unified IP Phone.
Initial password for accessing the voice-messaging system.
•
Make sure that you configured a default voice-messaging system password
for all users.
How the phone indicates that voice messages are waiting.
•
Make sure that you used Cisco Unified CallManager to set up a
message-waiting indicator (MWI) method.
Appendix A Providing Information to Users Via a Website
"Adding Users to Cisco
5-9).
OL-8726-02