Important Information; Dialing In To Your System; Troubleshooting; Solving Problems - Uniden D1780 User Manual

Dialing In to Your System

1. Call your phone number & wait until the system answers. (If the system
is turned off, it answers after 10 rings & sounds a series of beeps.)
2. During the greeting or beeps, press
security code. If you enter it incorrectly 3 times, the system hangs up
and returns to standby.
3. The system announces the time, the number of messages in memory,
and a help prompt. It beeps to let you know it's waiting for a command.
4. When you hear beeping, enter a 2-digit command from the chart.
01 Repeat message
02 Play message
03 Skip message
04 Delete message
#
If you don't press any keys for 15 seconds, the system hangs up
and return to standby.

IMPORTANT INFORMATION

Solving Problems

If you have any trouble with your phone, check this section first. If you
need help, call our Customer Care Line listed on the front cover.
General problems
No handsets can make or
receive calls.
A handset can't make or
receive calls.
A handset can make calls,
but it won't ring.
A handset is not working.
The phone keeps ringing
when I answer on an
extension.
20 - English
0 and immediately enter your
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts
Possible solutions
x Check the telephone cord connection.
x Disconnect the base AC adapter for a few
minutes; then reconnect it.
x Move the handset closer to the base.
x Make sure the ringer is turned on.
x Make sure Silent Mode is turned off (see page
15).
x Charge the battery for 15-20 hours.
x Check the battery connection.
x You may have to change the line mode.
Contact Customer Service for instructions.