Cisco 7940 - IP Phone VoIP Administration Manual page 133

Feature Support by Protocol for Cisco Unified IP
Phone 7960G and 7940G
This appendix provides information about feature support for the Cisco Unified IP Phone 7960G and
7940G using the SCCP or SIP protocol with Cisco Unified Communications Manager Release 7.0.
Table B-1
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to the
Cisco Unified IP Phone 7960G and 7940G Phone Guide for Cisco Unified Communications Manager
7.0.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in
Table B-1 Cisco Unified IP Phone 7960G and 7940G Feature Support by Protocol
Features
Calling Features
Abbreviated Dialing
Auto Answer
Barge (and cBarge)
Busy Lamp Field (BLF)
speed dial
Call Back
Call Display Restrictions
Call Forward All
Call Forward Busy
Cisco Unified IP Phone 7960G/7940G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP)
OL-15498-01
provides a high-level overview of calling features and their support by protocol. This table
Cisco Unified IP Phones 7960G, 7940G
SCCP SIP
Supported Not supported
Supported Supported
Supported Not supported
Supported Supported
Supported Not supported
Supported Supported
Supported Supported
Supported Supported
A P P E N D I X
For More Information
"Basic Call Handling—Placing a Call: Additional
Options"
"Using a Handset, Headset, and
Speakerphone—Using Auto Answer"
"Advanced Call Handling—Using a Shared Line"
"Advanced Call Handling—Using BLF to
Determine a Line State"
"Basic Call Handling—Placing a Call: Additional
Options"
"Basic Call Handling—Forwarding Calls to
Another Number"
"Basic Call Handling—Forwarding Calls to
Another Number"
"Basic Call Handling—Forwarding Calls to
Another Number"
B
Table B-1.
B-1