Activate Do Not Disturb - Cisco 524SG - Unified IP Phone VoIP User Manual

Activate Do Not Disturb

For visual call alerting and information without audible ringing, use Do Not Disturb (DnD). Calls receive normal
call-forward-busy and no-answer treatment.
To activate the Do-Not-Disturb feature:
1. Press DnD.
2. A text message indicates that the phone is in Do-Not-Disturb mode.
Note Pressing the DnD soft key while the phone is ringing immediately forwards the call to the call-forward destination set
on the phone. If the call-forward destination is not set, pressing the DnD soft key disables the ringer.
To deactivate the Do-Not-Disturb feature, repeat Step 1.
3
Phone Features Index
This section provides an alphabetical list of features for your Cisco Unified IP phone. Features supported in Smart Phone
Control Protocol (SPCP) are marked as "Supported".
Table 1 Features supported in SPCP protocols.
Phone Features, page reference
Activate Do Not Disturb, page 15
Additional Options—Place a Call, page 8
Adjust the Display Contrast, page 10
Adjust the Ring Volume, page 9
Adjust the Volume for the Current Call, page 9
Answer a Call, page 8
Basic—Place a Call, page 7
Call-Blocking (Toll Bar) Override, page 11
Clear Call History, page 14
Divert Incoming Calls, page 10
End a Call, page 8
End a Conference Call, page 12
Forward All Calls, page 11
Hold and Resume a Call, page 8
Join a Shared-Line Call, page 12
Live Record a Call, page 12
Manage Call Waiting, page 9
Mute a Call, page 9
Park a Call, page 10
Pick Up Calls, page 12
Place a Call from Call History, page 14
Place a Call from Your System Speed-Dial Directory or Fast Dial, page 13
Place and Establish Conference Call, page 12
Place Call from Your Local Directory, page 13
SPCP
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Supported
15