Write-protecting a Cartridge
Cartridges can be write-protected by sliding the tab on the back of the
cartridge. In this state, data can be read from the tape but not written onto it.
AIT-1
Using a Cleaning Cartridge
To keep the AIT drive in top condition, clean the drive unit as needed using
a cleaning cartridge with the AIT logo. When the drive unit needs cleaning,
the CLEANING REQUEST indicator lights. (For the SDX-1100V,
SDX-900V, and SDX-800V series drives, use the SDX-1100V, SDX-900V,
and SDX-800V series cleaning cartridges respectively.)
Use the cleaning cartridge made exclusively for each model.
SDX-1100V
SDX-900V
SDX-800V
AIT-5
AIT-4
AIT-3 Ex
AIT-3
AIT-2 Turbo
AIT-2
AIT-1 Turbo
AIT-E Turbo
Using your fingernail, push the switch in the
direction of the arrow to protect the tape from
writing or accidental erasure.
Return the switch to its original position to
re-enable writing.
Cleaning cartridge to use
SDX5-CL
SDX4-CL, SDX4-CLL
SDX3X-CL
21