Using A Cleaning Cartridge; How To Clean - Sony StorStation AITi200-ST User Manual

Write-protecting a Cartridge
Cartridges can be write-protected by sliding the tab on the back of the
cartridge. In this state, data can be read from the tape but not written onto it.
Using your fingernail, push the switch in the direction of the arrow to
protect the tape from writing or accidental erasure.
Return the switch to its original position to re-enable writing.

Using a Cleaning Cartridge

To keep the AIT drive in top condition, clean the head as needed using a
head cleaning cartridge with the AIT logo. When the head needs cleaning,
the CLEANING REQUEST indicator lights.
Use the cleaning cartridge made exclusively for each model.
AITi390-ST
AITi200-A, AITi200-ST, AITi100-A,
AITi100-ST, AITi50-A

How to Clean

1
Load the head cleaning cartridge into the AIT drive. Cleaning
starts automatically.
2
After about 15 seconds, cleaning will stop and the cartridge
will be ejected automatically.
Caution
Do not rewind the cleaning cartridge and reuse it. When you reach the end of
the cartridge, dispose it and buy a new cleaning cartridge with the AIT logo.
AIT-1
AIT-E Turbo
AIT-1 Turbo
AIT-2 Turbo
AIT-2
AIT-3
AIT-3 Ex
Cleaning cartridge to use
SDX3X-CL
SDX1-CL
27