– Hold the cross rod in such a way that the net partition can roll
up slowly and without damage into housing
– Fold the rear seats back into its original position.
WARNING
•
The belt locks and the belts must be in their original position
after folding back the rear seats and seat backrests - they must be
ready to use.
•
The seat backrests must be securely interlocked in position so
that no objects in the luggage compartment can slide into the
passenger compartment if there is sudden braking - risk of injury.
•
Pay attention that the rear seat backrest is correctly interlocked.
It is only then that the three-point seat belt for the middle seat can
reliably fulfil its function.
•
First check for yourself that the cross road is inserted into the
A
mounts
in the front position!
C
Using the system
Safety
Removing and installing net partition housing
A
.
B
Removing
– Fold the rear seats forwards ⇒ page 89
– Open the right rear door.
– Push the net partition housing
Installing
– Position the net partition housing into the mounts of the seat
– Push the net partition housing in the opposite direction of
– Fold the rear seats back into its original position.
Driving Tips
General Maintenance
A
arrow
and take it out of the mounts of the rear seat back-
1
rests in the direction of the arrow
backrest.
A
arrow
as far as the stop.
1
Breakdown assistance
Seats and Stowage
Fig. 88 Rear seats: Net
partition housing
A
⇒ fig. 88
in the direction of
A
A
.
2
Technical Data
101