Bicycle Holder In The Luggage Compartment - Skoda FABIA - 03-2010 Owner's Manual

Removing and installing net partition housing
Removing
– Open the right rear door.
– Fold the surfaces of the seats and seat backrests of the rear seats forward. First the
right then the left backrest.
– Push the net partition housing
out of the mounts of the rear seat backrests on the right in the direction of the
A
arrow .
2
Installing
– Position the net partition housing into the mounts of the rear seat backrests.
– Push the net partition housing in the opposite direction of arrow
stop.
– Fold the rear seats back into their original position.
Using the system Safety
Fig. 66 Rear seats: Net partition
housing
A  fig. 66
in the direction of arrow
A
A
1
Driving Tips

Bicycle holder in the luggage compartment*

Install cross member
– Remove the luggage compartment cover  page 65; if necessary we recommend
to remove, the net partition*  page 69.
– Take the head restraints out of the rear seat backrests and fold the rear seats in
A
and take it
1
order to extend the luggage compartment as desired.
– Release the fixtures
slightly pulling up the securing screws
already opened.
– Position the cross member with the fixed (not pulled out) part onto the right (in
direction of travel) lashing eye and then the pull out part
as far as the
eye.
– Press the fixtures
tighten the securing screws
– Check the attachment of the cross member by pulling it.
WARNING
When transporting the bicycles in the luggage compartment, ensure the safety
of the passengers transported.
General Maintenance
Fig. 67 Install cross member
A
at the ends of the cross member by fully loosening and
B
A
. The fixtures open when they are not
C
A
on both sides of the cross member until they lock in place and
B
A
.
C
Breakdown assistance
Seats and Storage 69
A
onto the left lashing
A
Technical Data