Advertisement
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a "program loss", the unit also
accepts "related" frequencies.
When opting for REG AUTO the change to a regional "related" station can only be
performed if there is a risk of losing the station. When selecting REGIONAL OFF, the
receiver can access the regional "related" station unlimited.
BEEP
Switching on or off the tone signal when storing the radio stations.
CD
Play function of the CD tack (tracks) in continuous or random order. If you select CD
PLAY, the tracks are replayed in normal order. If you select CD SCHFFL (Schuffle),
the tracks are replayed in random order.
LOUD
In case of low volume level, the function reinforces the range of bass and treble
frequencies.
Note
Each setting change is stored by changing to another menu point.
Radio mode
Waveband switch-over
Your radio is fitted with the wavebands FM and AM, in order to change, press the
button
for some considerable time.
A/F
In the ranges FM1/AM1 and FM2/AM2 there are each 6 memory spaces available,
in order to change, press the button
briefly.
A/F
The process of searching for and storing the radio stations
Manual search
– Set the frequency of the desired radio station by pressing the rocker
switch
or
.
Automatic station finding SEEK
– The radio searches for the next radio station in the selected waveband
by pressing the button
or
Function SCAN
– The radio station of the current waveband is briefly played (10
seconds) by pressing the button
– This function is ended by pressing the button
the current station is replayed.
Store station
– After selecting the radio station, hold the station key
should be stored until it briefly switches to mute and a brief signal
sounds.
Automatic station finding with storing the radio stations
– Press the button
AS
. An automatic station finding is started during
which the 6 stations with the strongest signal in the memory level FM2
and/or AM2 are stored. STORE is displayed on the display. This applies
only to the wavebands FM2 and AM2.
When storing the radio stations on the station keys
the desired radio station by pressing a station key
Radio
.
.
SCAN
once again and
SCAN
A
, on which it
7
A
is finished, you can call up
7
A
.
7
5
Hide quick links:
Advertisement
