Radio Mode - Skoda BLUES Owner's Manual

4 Radio
REG AUTO / REG OFF
Certain programs of the broadcasting companies are divided into regional programs
at specific times. That is why in individual regions the regional programs of a station
can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a "program loss", the unit also
accepts "related" frequencies.
When opting for REG AUTO the change to a regional "related" station can only be
performed if there is a risk of losing the station. When selecting REG OFF, the
receiver can access the regional "related" stations unlimited.
GALA
Your radio increases automatically its volume with the increasing vehicle speed. A
higher setting value results in a stronger volume increase.
LOUD
In case of low volume level, the function reinforces the range of bass and treble
frequencies.
BEEP
Switching on or off the tone signal when storing the radio stations.
ON VOL
Your radio stores the last volume set before switching off. If the value is higher, the
volume is reduced to the value of the parameter ON VOL after switching on the
radio again.
PHONE*
If your vehicle is equipped with a handsfree system, the monophone play function
of the mobile phone calls is carried out via the loudspeakers of the vehicle.
PDC AT*
If your vehicle is equipped with "parking aid", the volume is automatically decreased
to a pre-defined value, when the "parking aid" is active.
PDC AT0 - does not restrict the volume;
PDC AT1 - restricts the current volume to a middle level;
PDC AT2 - restricts the current volume to a low level;
PDC AT3 - switches off the tone completely (Mute).
AUX*
Setting of the input sensitivity AUX LEV:
AUX LEV 1 - high level, used in particular for notebooks;
AUX LEV 2 - middle level, used for cassettes or CD player;
AUX LEV 3 - low level, used for MP3 player;
Note
Each setting change is stored by changing to another menu point.

Radio mode

Waveband switch-over
Your radio is fitted with the wavebands FM and AM, in order to change, press the
rocker switch A/F for some considerable time.
In the ranges FM1/AM1 and FM2/AM2 there are each 6 memory spaces available, in
order to change, press the rocker switch
The process of searching for and storing the radio stations
Manual search
– Set the frequency of the desired radio station by pressing the rocker switch
or .

Automatic station finding SEEK
– The radio searches for the next radio station in the selected waveband by
pressing the rocker switch or

Function SCAN
– The radio station of the current waveband is briefly played (10 seconds) by
pressing the rocker switch
SCAN
– This function is ended by pressing the rocker switch
current station is replayed.
briefly.
A/F
.

.
once again and the
SCAN
