Radio Mode - Skoda CAR RADIO SWING - FOR OCTAVIA 05-2009 Manual

REG
Certain programs of the broadcasting companies are divided into regional
programs at specific times. That is why in individual regions the regional programs
of a station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a "program loss", the unit also
accepts "related" frequencies.
•
FIX - the receiver switches to a regional "related" station, if the reception of the
current station could be interrupted;
•
AUTO - the receiver can access the regional "related" station unlimited.
BT-AUDIO*
Enables a wireless transfer of MP3 data from the telephone preinstallation.

Radio mode

Waveband switch-over
– Press the button RADIO for a long period of time.
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory
levels, i.e. 3 levels for the FM waveband and 3 levels for the AM waveband. There
are each 6 memory spaces available on these levels.
Activation of the FM waveband
The FM waveband is activated when pressing the station key
pressing the button , you can select between the memory levels FM1, FM2
RADIO
and FM3.
Activation of the AM waveband
The AM waveband is activated when pressing the station key
pressing the button RADIO , you can select between the memory levels AM1, AM2
and AM3.
The process of searching for and storing the radio stations
Manual search
– Search the frequency of the desired radio station by turning the menu
control button
Store station
– After selecting the radio station, hold the station key
should be stored until it briefly switches to mute and a brief signal
sounds.
Automatic station finding with storing the radio stations
– Press the button
which the 6 stations with the strongest signal in the memory level
FMAS and/or AMAS are stored.
When storing the radio stations on the station keys
the desired radio station by pressing a station key
Note
The stored radio stations of the current waveband are updated and stored once
again in the memory level FMAS and/or AMAS by repetitively pressing the button
.
AS
Function SCAN
A
FM. By briefly
12
The stations of a waveband can be played briefly one after the other (for
ten seconds).
– Press the menu control button
available stations of the current waveband.
A
AM. By briefly
12
– In order to call up the original radio station, press the station key
CANCEL.
General information
A
.
2
. An automatic station finding is started during
AS
A
is finished, you can call up
12
A
.
12
A
, the radio searches automatically all
2
5
A
, on which it
12
A
12