Zenith ZLD20A1 Operating Manual & Warranty page 35

Selecting bilingual signals
Selecting bilingual signals
Screen display in stereo signal
Screen display in bilingual signal : SAP
* Bilingual (dual language) signal
This signal contains the secondary language signal in addition to the primary language.
There are the primary and secondary language and stereo modes in bilingual signal.
[Mono] : The primary language is output from left and right speaker. Signal mode is mono.
[Stereo] : The primary language is output from left and right speaker. Signal mode is stereo.
[SAP] : The secondary language is output from left and right speaker.
1 Press the menu button to select the
screen display as below.
MTS Mono
Balance 0
AVL Off
DASP User
Equalizer
Use And
D D E E F F G G A
2
Press the channel (
D,E
select [MTS].
* If some strange sound is heard when watching TV programs on stereo mode in poor signal
areas, or if in non-dual signal service area, make sure to select mono mode.
* [Stereo] or [Mono] mode can be available only when broadcasting signal contains the data.
206-3699
: Stereo
3
Press the volume (
select an audio mode you want.
MTS
Balance
AVL
DASP
Equalizer
Use
Each press of volume ( F , G ) buttons
changes the screen display as below.
) buttons to
4
Press the
) buttons to
F , G
Mono
0
Off
User
D D E E F F G G And
A
Mono Stereo SAP
enter
( ) button.
A
35