Zenith ZLD20A1 Operating Manual & Warranty page 11

W atching TV programs
W atching TV programs
* Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the adaptor.
a. Connect the antenna cable to the antenna input port of the set.
b. Connect the adaptor to the power input port of the set.
c. Connect the power plug to the wall outlet socket after connecting the power cord to the adaptor.
KE R
SP EA
(R , )
KE R
SP EA
)
(R ,
Note : If the TV feels cold to the touch, there may be a small "flicker" when turned on.
This is normal, there is nothing wrong with TV.
Warning: When you install the TV after separating stand from it, There is a damage to upset the TV
toward bottom.
206-3699
a
b
c
11