Vivotek FD8361L User Manual page 149

ip <ip address>
index <value>
return <return page> Redirect to the page <return page> after the parameter is assigned. The
s<0~(m-1)>_h264 0~2
_profile
Get SDP of Streams
Note: This request requires Viewer access privileges.
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
"network_accessname_<0~(m-1)>" is the accessname for stream "1" to stream "m". Please refer to the
"subgroup of network: rtsp" for setting the accessname of SDP.
You can get the SDP by HTTP GET.
Open the Network Stream
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/<network_http_s<0~m-1>_accessname>
For RTSP (MP4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>
"m" is the stream number.
For details on streaming protocol, please refer to the "control signaling" and "data format" documents.
Single address: <ip address>
Network address: <ip address / network mask>
Range address:<start ip address - end ip address>
The start position to add or to delete.
<return page> can be a full URL path or relative path according to the current
path. If you omit this parameter, it will redirect to an empty page.
4/4 0 => Baseline profile
1 => Main profile
2 => High profile
VIVOTEK
User's Manual - 149