Selecting New Settings For A Button - Visioneer Patriot 430 User Manual

40 V P
ISIONEER ATRIOT
Click these arrows to
see the properties for
the button whose
settings you want to
change.
Select a software
application as the
destination to send
scanned documents.
430 S U ' G
CANNER SER S UIDE
S N S
ELECTING EW ETTINGS FOR A
For each of the nine OneTouch buttons, you can select a new
Destination Application, Scan Configuration, and Document
Format.
To select new settings for the Scanner Button:
1. Click the button selection arrows to select the button you want to
change.
Each button has its own settings. So, as you click the arrows to cycle
through the buttons, the available settings on the window change to
show them for each button.
2. From the Select Destination list, select the application where you
want documents sent when scanning is finished.
See "Selecting Options for a Button" on page 57 to display a full list
of the Destination Applications that you can use with the scanner.
B
UTTON
Select a format for the
scanned image.
Select a configuration
for scanning the item.