Scanning With Event Forwarding - Visioneer Patriot 430 User Manual

S E
CANNING WITH VENT
If you want to specify an application to use for scanning at the start of
the process, you can use event forwarding. The scanner will feed in the
first page, but will then stop until you select the application to use. After
you select the application, its interface will open and you can use it to
continue with the scanning.
To scan with event forwarding:
1. Open the OneTouch Properties window.
2. Using the arrows, choose a button to use for the event forwarding.
3. Select Still Image Client as the Destination Application.
Note that you cannot choose a page format for this option because
the actual Destination Application is not selected until after the
scanner feeds in the first page of your document.
4. Choose a Scan Configuration.
5. Click OK.
The OneTouch Properties window closes.
C
ONFIGURING THE
F
ORWARDING
O T B
NE OUCH UTTONS
91