EVGA 122-M2-NF59-TR User Manual page 39

IDE Function Setup
Use this menu to setup the data flow control for IDE
RAID Config
Use this menu to enable/disable SATA RAID
USB Config
Use this menu to setup USB interface
MAC Config
Use this menu to turn off MAC
IEEE1394 controller
Use this setting to set whether the IEEE 1394 function is enabled.
HD Audio
Use this setting to configure HD Audio
IDE HDD Block Mode
Use this setting to configure HDD Block Mode
Onboard FDC Controller
This option is used to set whether the Onboard FDC Controller is enabled.
Onboard Serial Port 1
This option is used to assign the I/O address and IRQ for onboard serial port 1.
Power Management Setup
EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 38