Time Zone - TP-Link TD-W8951NB User Manual

TD-W8951NB

4.6.2 Time Zone

Choose "Maintenance→Time Zone", you can configure the system time in the screen (shown in
Figure 4-49).
The system time is the time used by the device for scheduling services. There are three methods
to configure the time. You can manually set the time or connect to a NTP (Network Time Protocol)
server. If a NTP server is set, you will only need to set the time zone. If you manually set the time,
you may also set Daylight Saving dates and the system time will automatically adjust on those
dates.
1) NTP Server automatically
Select NTP Server automatically as the Synchronize time, you only need to set the time zone.
Note:
The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the Router
will get the system time automatically from the NTP Server. You can also configure the NTP Server
address manually, and then the Router will get the time from the specific Server firstly.
2) PC's Clock
Select PC's Clock as the Synchronize time, you don't need to set any items.
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
Figure 4-49
68