Snmp; Upnp - TP-Link TD-W8951NB User Manual

TD-W8951NB
Other operations for the entries as shown in Figure 4-39:
Select the URL Index to view or modify the entry.
Select the URL Index to locate the specific rule, and then click the DELETE button to delete the
entry.

4.5.3 SNMP

Choose "Access Management→SNMP", you can see the SNMP screen. The Simple Network
Management Protocol (SNMP) is used for exchanging information between network devices.
Get Community: Set the password for the incoming Get and Get next requests from the
management station.
Set Community: Set the password for incoming Set requests from the management station.

4.5.4 UPnP

Choose "Access Management→UPnP", you can configure the UPnP in the screen (shown in
Figure 4-44).
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide
Figure 4-43
64