Table of Contents
Advertisement
4-1
Frequently Asked Questions
1.
Question: How do I configure SIMLC-HTC/SIM1U-HTC/SIMSO-HTC?
Answer: Boot from the supplied CD with your IPMI card. The CD will auto-detect
motherboard type and flash IPMI card. You can use the ipmicfg.exe utility to con-
figure the IP address and MAC address of the IPMI card.
2.
Question: Which IP and MAC address should I use for SIMLC-HTC/
SIMSO-HTC?
Answer: You need to use LAN1 IP and MAC address for your IPMI card when you
program it using ipmicfg.exe utility.
3.
Question: Can I configure Gateway IP address of my IPMI card?
Answer: Yes you can use the ipmicfg.exe utility to configure IPMI card.
4.
Question: Do I need to install any driver on my server, which has an
IPMI card?
Answer: No driver installation is required on your host which has an IPMI card.
4-2
Contacting Supermicro's Technical Support
If you still have problems after trying out all the recommended solutions, please
contact our technical support @ (408) 503-8000 or visit our web site @ www.
supermicro.com/support/.
Chapter 4
Troubleshooting
4-1
Chapter 1: Introduction
Advertisement
Table of Contents
