Table of Contents
Advertisement
Chapter 3: Troubleshooting
3-8
Sensors
Figure 3-4
Clicking on the Sensors tab of the IPMI View management session in the Viewing
Window (as shown in Figure 3-4) provides you with detailed information on the
sensors monitored by the BMC. It shows the reading of supported voltages and fan
speeds and temperatures monitored by the BMC. The current reading is shown in
yellow numbers, the high limits/low limits in red numbers and a description for the
monitoring sensors in blue text beneath the monitoring sensor figures.
Fan speeds have only a low limit, temperatures have only a high limit, and voltages
have both high and low limits.
Refreshing Monitor Status
You can configure the IPMI View to automatically refresh the monitoring status pe-
riodically by checking the Auto Refresh check box and selecting the refresh period
in seconds in the seconds list. Or, click the Manual Refresh button to refresh the
monitoring status every time you need an update.
3-25
Advertisement
Table of Contents
