Sony Ericsson MBV-100 User Manual page 8

To stop pairing, press and hold the top
key.
After you have paired your watch with
a phone, the watch will automatically
connect to the phone as soon as the
phone is on and within range.
Phone settings
If pairing fails, you need to set the watch
in pairing mode and repeat the pairing
procedure.
If the phone is out of range of your
watch, you are asked if you would like
to reconnect again. You can choose
between Always ask
allow in your phone.
• Always ask
If you choose Always
will always be asked if you want to
reconnect each time the watch and
the phone are within range.
• Always allow
If you choose Always
automatically reconnects to the phone
each time both devices are within
range.
8 English
This is the Internet version of the User's guide. © Print only for private use.
and Always
ask, you
allow, the watch
Pairing mode
To pair your watch a second time, for
example, with another phone or if the
first pairing failed, do this manually by
setting the watch to pairing mode.
To set the watch to pairing mode
•
Press the bottom key repeatedly to
select pairing mode
press the top key.
and then
appears.