Advertisement
Na im Un it i Setu p
Note:
The wireless passphrase/access key is created when
the wireless router is first set up and could be a word or a
series of numbers and letters. If the passphrase/access key
is not known, check on the router settings page or with the
person who initially set up the router.
If the selected network is insecure
and requires no passphrase or
access key to join, NaimUniti will
display an alert message. Pressing
the handset
ok/list
immediately connect NaimUniti
to the network and display a
confirmation screen.
Note:
Wireless connection
difficulties can sometimes be
resolved by changing the wireless
connection channel in the router
settings.
4.6.2 Non-DHCP (Static) Network
Connection
DHCP
If
is de-selected in the Network Settings
menu, five further parameters will be displayed.
Parameter
IP:
Mask:
Gateway
(Gtwy): User definable (numerical entry)
DNS1:
DNS2:
These settings enable NaimUniti to connect to a network
using a fixed IP address. On selecting each one in turn,
numerical entry screens will be displayed that require
completion with the appropriate network IP address
settings. Consult your network
router's user documentation
for help with specifying fixed IP
address settings.
4.7 The Front Display
Menu
The Front Display setup menu enables the behaviour of the
NaimUniti front panel display to be modified. The options
are tabulated and described in the following section:
Parameter
Options
Off During Mute:
Yes / No
Auto Off:
Select from list.
When
Off During Mute
will switch off when mute is engaged.
length of time the NaimUniti display will remain switched
E12
This wireless network is
insecure and requires no
passphrase or access key.
Press OK To Connect
key will
Network Settings
4IP:
Mask:
255.255.255.0
Gtwy:
DNS1:
Options
U ser definable (numerical entry)
Default: 0.0.0.0
User definable (numerical entry)
Default: 0.0.0.0
Default: 0.0.0.0
User definable (numerical entry)
Default: 0.0.0.0
User definable (numerical entry)
Default: 0.0.0.0
Front Display
4Off During Mute:
Auto Off:
is selected the NaimUniti display
Auto Off
defines the
on after the last interface operation is carried out. Time
periods of between 10 seconds and 1 hour can be
selected.
Note:
If the display has been switched off using the
handset disp key this setting will take priority over the Auto
Off setting. The display will always
switch on briefly when control
commands are received.
4.8 The Handset Keys
Menu
The Handset Keys setup menu
enables the NaimUniti inputs assigned to each handset
input selection key (Diagram
3/7
4.8.4) to be changed, and
192.168.0.80
the function of the handset
navigation keys (Diagram 4.8.3)
192.168.0.1
to be configured.
192.168.0.1
4.8.1 Navigation Key Functions
Selecting the
Handset Keys menu opens a further menu that enables the
selection from two modes of handset up (
6
(
) key function: Input
Input
If
is selected the keys will
select inputs and if
the keys will be disabled.
Selecting the
parameter from the Handset Keys
menu will open further menus
enabling the configuration of
3
the left (
) and right (
independently for the CD, iPod,
Radios, USB and UPnP™ inputs.
The options available for the
USB, iPod, UPnP™ and CD inputs are Track,
Track
is selected the left (
the previous or next track. If
is selected the keys will return
NaimUniti to list mode, and if
1/2
Off is selected the keys will be
No
disabled.
2 mins
The options available for the
Radio input are Station, Preset,
List, and Off. If
(
4
) keys will select the next or previous station. If Preset
is selected the keys will select the previous or next stored
Handset Keys
4Up/Down
Left/Right
CD
Radio
Up/Down Actions
4Input
Off
Up/Down Actions
parameter from the
5
and Off.
Left/Right
4CD
Off
is selected
iPod
Radios
USB
Left/Right Actions
L eft/Right Actions
4Track
4
List
) keys
Off
3
4
) and right (
) keys will select
List
L eft/Right Actions
4Station
Preset
List
Off
3
Station
is selected the left (
1/10
1/2
) and down
1/5
Track
Track
Station
Track
1/3
List
and Off. If
1/4
) and right
Advertisement
