Using The Auto-Equalizer; Recalling Equalizer Curves; Adjusting Equalizer Curves - Pioneer DEH-P9400MP Operation Manual

U
sing the auto-equalizer
The auto-equalizer is the equalizer curve creat-
ed by auto-equalizing. (Refer to "Creating the
auto-equalizer curve" on page 50.)
You can turn the auto-equalizer on or off.
1. Press AUDIO and then press NEXT twice.
2. Press A.EQ to select the auto-equalizer
on/off mode.
3. Press A.EQ to turn the auto-equalizer on.
"AUTO EQ ON" appears in the display.
• Press A.EQ again to turn auto-equalizer
off.
Note:
• "A.EQ" is not displayed if auto-equalizing has not
been carried out. In this case, this mode is inactive.
R
ecalling equalizer curves
The graphic equalizer lets you adjust equaliza-
tion to match the car interior acoustic character-
istics as desired. There are seven stored equal-
izer curves which you can easily recall at any
time.
1. Press EEQ to switch to the easy equalizer
mode.
2. Press NEXT to switch between "CSTM2"
and the other selections (curves).
3. Press the corresponding button to select
the desired equalizer curve.
Button Equalizer curve
S.BASS Super bass
PWRFL Powerful
NATRL Natural
VOCAL Vocal
FLAT Flat
CSTM1 Custom1
CSTM2 Custom2
• "CUSTOM1" and "CUSTOM2" are adjusted
equalizer curves that you can create for
yourself. (Refer to "Adjusting 13-band
graphic equalizer" on page 47.)
• When "FLAT" is selected the equalizer
makes no supplement or correction to the
sound. This is useful for checking the
effect of the equalizer curves by switching
alternatively between "FLAT" and a set
equalizer curve.
Note:
• You can also use 2 and 3 to select the desired
equalizer curve.
• If you do not operate the function within about eight
seconds, the display is automatically returned.
A
djusting equalizer curves
The factory supplied equalizer curves, with the
exception of "FLAT", can be adjusted to a fine
degree (nuance control).
1. Press AUDIO and then press EQ1 to
select the graphic equalizer mode.
2. Press 5 5 or ∞ ∞ to adjust the equalizer
curve.
Each press of 5 or ∞ increases or decreas-
es the equalizer curve respectively.
• "+6" – "–6" is displayed as the equalizer
curve is increased or decreased.
Note:
• The actual range of the adjustment differs depend-
ing on which equalizer curve is selected.
• The equalizer curve with all frequencies set to 0
cannot be adjusted.
• You can use 2 and 3 to select the desired equaliz-
er curve.
46