Zone Control - Kenwood DDX616 Instruction Manual

I
I
D
Display the
Zone Control screen
I
Touch [CD]
>
[~]
>
[Zone Control]. (page 59)
II
Set the Zone Control
[Single Zone] Sets the unit to single zone.
[Dual Zone] Sets the unit to dual zone.
[Front Source] Sets the front audio source.
[Rear Source] Sets the rear audio source.
~
~
When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUT terminal is
also switched to the same source.
[Rear VOL.] Adjusts the volume of the rear
channel.
~
~
1
There are following limitations when zone function is set
to "ON".
- There is no output from the subwoofer.
- <Equalizer Control> (page 60) and <Speaker Setup>
(page 75) are not available.
DDX SERIES
DDX616/DDX6046BT/DDX516 English 61