eMachines H5088 Reference Manual page 104

2
3
Recovering pre-installed software and drivers using
recovery discs
If you created a multiple-disc set of recovery discs, each disc
contains a unique set of software and drivers. If a recovery
disc does not offer the software or driver you need to recover,
try another disc.
To recover software and drivers using recovery discs:
1
2
3
4
98
Chapter 6: Troubleshooting
To recover software that was pre-installed, click
Programs, then click Application recovery.
- OR -
To recover device drivers that were pre-installed, click
Hardware, then click Device driver recovery.
Click the software or driver you want to recover, then
click Next.
Insert a software and driver recovery disc into a CD or
DVD drive. If an AutoPlay dialog box appears,
click Run Grc_Vista.exe. If an AutoPlay dialog box does
not appear and eMachines Recovery Center does not
start, open Computer and run the file Grc_Vista.exe
on the disc.
The eMachines Recovery Center starts.
To recover pre-installed software, click Application
recovery, then click the software you want to recover.
- OR -
To recover pre-installed device drivers, click Device
driver recovery, then click the type of driver you want
to recover.
Click Next.
If the software or driver is not shown on the list, and
you have a multiple-disc set of recovery discs, close
eMachines Recovery Center and try another disc.